Features
Two BEC blocks
Two BEC units for powering powerful servos and other external devices - 5V 3A and 5/9/12V 3A. In the second unit, the voltage is selected by soldering bridges on the board.For the kamikaze, the second BEC can power the drone's targeting board.
Three servo outputs
We have increased the number of service outputs to expand the use of the controller - one is located next to the camera and will be easy to connect to the camera's rotary mechanism. The other two are for controlling the initiator or servos.
6 UARTs
In addition to the standard receiver and GPS, you can connect all the desired external modules (telemetry sensors, etc.)
Up to six motors supported
The GALYCHYNA F405 v3 8S/60A has 6 ESC outputs and can control six motors. By adding two controllers for additional drone beams, you can assemble a hexacopter and increase the drone's payload capacity.
2 PINIO
Two controlled PINIO outputs with 5V/1A switching capability.
Ready to fly
The flight controller is immediately configured for the most popular 10" assembly. So, in most cases, you can fly almost out of the box.
Video channels control
The ability to switch video channels during flight makes it impossible for other drones to interfere with the signal.
Hiding the starting point
While this function is enabled, the OSD covers almost the entire image and will not give away your position to the enemy, even if the signal is intercepted.
Bluejay firmware on the ESC
Improved flight performance with Bi-directional DShot and RPM filtering, which ensures a smoother drone flight. This firmware also allows you to customize the launch melodies.